.png)
Leak Detection Systems for Conventional Roof Assemblies
vs.
Always be aware of your roof health by tracking moisture in real-time
Receive automated alarms to your phone or email
Reduce repair costs by narrowing the search area before any boots even hit the roof
Enable preventative maintenance to extend the useful life of your roof
Defer maintenance with confidence that your roof is in good health
Track moisture from installation: during construction and within the roof warranty period
Accepted for the Roofing Contractors of British Columbia's RGC Waterproofing Guarantee Program
Contact SMT with details of your project to receive a free budget estimate for a FutureCast system and installation, or read on for more details.
Downloads
Everthing you need to know about our Conventional Roof Leak Detection Systems, all in one place.
FutureCast Leak Detection
System Overview
FutureCast Leak Detection
System A+E Spec
What is a Leak Detection System?
A leak detection system is a network of sensors permanently installed in the roof assembly, which report moisture content.
For building owners and managers, a leak detection system assists with maintenance decisions and extend the useful life of the roof.
Augmented Reality
FutureCast Active enables cutting edge data visualisation - allowing maintenance teams to "see through" the membrane in real time, as the moisture sensors in the roof assembly show where moisture has accumulated. This aids repair efforts and cuts down on costly removal of the upper layers of the assembly.
Virtual Reality
The same roof performance data can be viewed in Virtual Reality right from your desktop, so you can keep track of large / remote sites without leaving the office.
How it Works
Extensive grid layouts
Target on penetrations and perimeter of the building
During construction or renovation, moisture detection sensors are laid out in a grid on top of the air/vapor barrier, below the waterproof membrane.
These sensors are connected to advanced monitoring electronics which record measurements and upload them to the cloud for review.
OR
Protection Board
Membrane (EPDM, 2-ply SBS, BUR, TPO, PVC, or single ply)
Insulation (Polyiso, EPS, XPS, or mineral wool)
Moisture Detection Tape (MDS)
Air Barrier
Roof Deck (wood, metal, or concrete)
Previous Projects
Bell MTS Data Centre
© ChrisD.ca
New roof: 65,000 Sq. Ft. Existing roof: 65,000 Sq. Ft.
Building Intelli conventional roof monitoring
Milton District Hospital
© Smith and Anderson
330,000 Sq. Ft.
Building Intelli conventional & inverted roof monitoring
